Dental Courses in Mangalore

Fellowship in General Dentistry is an exclusive Fellowship programme conducted at AIAD centres in India which enables a Dentist to begin their dental career with confidence & enriches the practicing dentist in their clinical skills.

Programme Highlights:

• This Fellowship Program includes all the content of Fellowship in Clinical Endodontics, apart from the following added content .

• Participants will be awarded both the certificates FCE & FGDIt is the amalgamation of multi-department works to a single chair uni-dentist expertise.

• Enables a Dentist to treat almost all aspects of Dentistry except Orthodontics, Implants, FMR & few major surgical procedures.

• Gives an edge to a young dentist to begin their own dental practice

• Alongwith dental treatment skills it gives an opportunity to the participant to build-up practice management skills as well which is generally neglected in our dental schools but it has been given much importance at AIAD centres as this particular aspect has a major role in achieving higher levels of practice

Programme content:

• Initial 3-4 days of course contains lectures on basic & rotary endodontics alongwith Hands-on practice on extracted teeth

• Once the participant is confidant to open access cavity preparations, patients are allotted (A minimum of 10 root canal patients / participant provided)

• Each participant will learn crown preparations on extracted teeth first & then allowed to do the same on patients (A minimum of 15 crown preparations /participant provided)

• Learn & do the retraction of gingiva by using retraction gel & gingival retraction cord in anterior cases

• Use Elastomeric impression material in cases where you need to record finer details

• Learn atraumatic extractions on patients

• Manage prosthetic replacement for difficult crowns by learning post & core build-up in patients

• All participants of this programme are free to do the composite fillings or any other fillings in the daily O.P. of our attached charity hospital

• All participants shall have the opportunity to learn placing tooth Jewels

• All participants can watch the live procedures of implants & lasers being done at the centre regularly by either the faculty or other implant fellows.

• Present a Seminar at the end of the programme

• Clear the final assessment by external & internal evaluators

• Fellowship certificate is awarded in the convocation or can be collected from centre after convocation only

Accomodation:

• Accomodation can be recommended from third party vendor at extra cost for both men and women. 
• Cost of accommodation ranges from 6000 to 10000 per month, inclusive of food.

COURSE HIGHLIGHTS

• Practice based approach
• Hands on patient
• Deminstrations
• Do's and Dont's
• Launchpad for ICOI

INCLUDES

• Implant and patient
• Framed certificate with participant's photograph
• Executive lunch and refreshments

Day 1

• Introduction to Implantology
• Case Selection
• CBCT interpretation
• Implant placement demonstration
• Hands on implant placement in model

Day 2

• Hands on implant placement in patient
• Introduction to Prosthodontics in implantology
• Implant impression demonstration

Day 1

• Introduction and rationale for lasers
• Types of lasers
• Clinical application of lasers
• Diode Laser physics
• Clinical application of diode laser in dentistry
• Teeth Bleaching & lasers
• Low level laser therapy/ Laser biomodulation
• Case gallery and discussion
• Laser safety
• Overview of hard tissue laser

Demonstration cum hands on session:

Hands on demo and training of lasers on vegetables & goat jaws

Live Demonstration on the patients

Depigmentation Case

Frenectomy Case

Flap Surgery

Accomodation:

• Accomodation can be recommended from third party vendor at extra cost for both men and women. 
• Cost of accommodation ranges from 6000 to 10000 per month, inclusive of food.

Course Highlights:

Hands-on training in retreatodontics, post and core placement (Metal & Fiber post systems) and crown preparations.

Mentorship Program Highlights:

We have trained more than 1300 dentists from 25 countries apart from dentists from all over India. Our program is limited to 15 participants per module to enable better personal care and attention. Each participant will perform more than 25 root canal exercises, assess more than 50 obturations with digital radiography and observe more than 200 access cavity preparations under magnification during this purely clinically oriented program. Our commitment for excellence in endodontic training is unwavering and the facilities offered are unmatched in India.

This mentorship program is divided into three modules spaced over three to six months.

Module-II Advanced Endodontics

Day One : Retreatment Strategies, Managment of Ledges & Perforations
          and Thermoplasticized obturation techniques
Day Two : Prosthodontic module on crown and bridge preparations, Laminate preps,
          Conventional, Digital Impression making, Cementation protocols
Day Three : Post Endodontic Restorations (Fiber and metal post systems clinical protocols)

Course highlights : 

-During the course each participant will perform:
-More than SIX retreatment procedures and thermoplasticized obturations
-More than Ten crown and laminate preparations

THE PROGRAM AN OVERVIEW:

The increasing demands for high quality cosmetic dentistry makes it essential for the practioners to update themselves on the material science and the practical techniques to meet the patient needs. This program on cosmetic dentistry has been carefully crafted for practioners to incorporate cosmetic dentistry as an integarl part of his / her practice. This clinically oriented curriculum is presented in an best possible educational environment, which makes learning exciting and effective. The academy is equipped with all latest equipments and materials of International Standards.

Lectures, demonstrations and hands on workshop are planned in such a way that the participants will be able to effectively incorporate the learnt techniques in their day to day practice. The program will also include – discussions and evaluations which will enhance the most effective interchange of knowledge.

LEARNING OBJECTIVES :

• Quick review of basic sciences essential for understanding the art of cosmetic dentistry
• To make effective diagnosis and treatment planning
• To master the art of selecting the right materials and techniques
• Effective lab communication
• Essentials of photography
• Introduction to full mouth rehabilitation
• Mastering essential clinical procedures with hands on for direct and indirect restorations
• Incorporation of magnification to practice

Program Highlights

• The program is designed for a maximum of 10 participants only to enable personalize interaction and attention.
• The program consist of 3 modules – total 10 days spread over 5 months, giving time to implement what is learnt.
• The program will consist of lectures, demonstrations, hands on workshops with interactive evaluation.
• The program is structured in a logical sequence to master the art and science of cosmetic dentistry.
• Lectures will be closely paired with hands on sessions required for different clinical scenario's.

BRIEF GLANCE OF THE MODULES

Module 1 : Mastering composite Artistry | Duration : 3 days

• Introduction to the field of cosmetic dentistry
• Adhesive dentistry
• Material advancements and instrumentation
• Shade Matching and shade mapping for composites
• Clinical techniques on Diastema Closure, class III and masking of stains with hands on
• Tips for successful Class II restorations with hands on
• Detailed training on Class IV restoration with finishing and polishing secrets - hands on
• At the end of the program participants will be able to do restorations that blend perfectly with the existing dentition, the first step in cosmetic dentistry

Module 2 : Excellence in Ceramics | Duration : 3 days

• Complete in and out of ceramics will be dealt in this module. This includes metals ceramics and complete overview on All Ceramics.
• Theory of ceramics and lab processing and choice of materials will be dealt in detail.
• Shade matching in ceramics.
• Visit to a dental Lab to get the insight of step by step processing of Ceramics, esp CAD CAM
• All ceramic anterior and posterior crown prep with hands on
• All ceramic anterior and posterior crown prep with hands on
• Laminate theory and technique with hands on
• Temprorization theory and hands on
• Cementation for all ceramics with hands on
• At the end of the program participants will be able to choose the right material and do a practically invisible restorations that is required on day to basis.

Module 3 : Smile Designing | Duration : 4 Days

• Once the participants are thorough with regular procedures and mastered them, they will be taken to the next level in this module. The participants will be working under magnification, 2.5X loupes.
• Smile design principles and practice will be dealt in detail
• Orientation to magnification with loupes
• Introduction to digital dentistry and dental photography
• Composite veneering for smile designing cases with hands on
• Ceramic veneering for smile designing cases with hands on
• Temprorization and cementation hands on
• Functional rehabilitation and its importance in the success of cosmetic restorations and introduction to full mouth rehabilitation
• Demo and hands on face bow transfer
• Introduction to accreditation programme of AACD
• Practice building the inside secrets and closing comments
• The modules will be with a gap of one month, during this time interval the participants are requested to implement what they have learnt come back with pictures and doubts for discussion to learn more.

Get a first hand experience in performing a Sinus Lift and placing an Implant with ease using a computer aided guide.

Course HighLights

• Small cohort 
• Individual attention
• Experienced Panelists
• Certificate
• Refreshments and lunch

Day 1

-Basics of Implants
-Basics of CBCT
-Basics of Guides/Stents
-Guided Implant Placement
 demonstration on a model
-Guided Implant Placement by participants on the model

Note : Last date for registration is 9th April 2018

Course Highlights

• Introduction to endodontics
• Diagnosis (endo-perio lesion) diagnostic tests
• Anesthesia techniques (supplemental anesthesia)
• lecture and demonstration on isolation principles. Demonstration and hands-on rubber dam application
• Selection criteria (single visit/multiple visit)
• Access preparation
  • Modifications in access preparation (finding all)
  • Refinement of access preparation
• locating canal orifices (different methods)
  • Dealing with calcifications
• Understanding taper variable vs fixed
• Shaping techniques (use two systems for hands on)
  • Modified crown down technique
  • Dual taper technique
  • Apical gauging
• Irrigation protocol - Disinfection in endodontics
• Rationale of irrigation in endodontics
  • Learn different techniques of disinfection
  • Use innovative endo irrigator plus for irrigation
  • Learn how to confidently manage lesions of endo. origin
• Intra-canal medicaments
  • Obturation techniques
  • Understanding and matching the taper
  • Selecting the master cone
  • Cold lateral vs warm vertical condensation
  • Sealers
• Post-endodontic restoration
  • Coronal seal
  • Choice of materials
  • Techniques for coronal seal
• Post and core
  • Selection criteria
  • Types of post
  • Techniques of post placement
• Introduction to magnification in Endodontics & Surgery

How the course is different from other courses:

• Hands on of 3 different Endo systems with 3 different techniques (1st time in India)
• Hands on of access opening included
• Hands on of Post-Core included
• Learn various irrigation system

Participants has to get:

• 2 extracted teeth without access cavity preparation (1 should be mandibular 1st molar). Teeth are not to be mounted in plaster blocks.
• Diagnostic instruments: Mouth Mirror, Probe, Tweezer
• Air rotor & burs for access cavity preparation
• Also document one of your failed/difficult cases & mail it to Dr. Ankit J Desai at drankitd@gmail.com before 1/12/15. (Pre- & Post-Endo. IOPA is must) Out of all the cases, few will be selected for an Interactive session/panel discussion on the 2nd day.
• Course fees include scientific sessions, Course materials (3 Different Systems), Tea and a breakfast, Lunch and evening Tea.

Master the art of Implantology: with the Implant Experts- Dr.V.S.Mohan & Dr. Bajwa from Germany.

DENTE GURUKUL COURSE OVERVIEW: This course is designed for all the Dental Surgeons. Lectures will include the science of Implantology, surgical considerations namely inscions, flap design, socket preservation, bone grafting and suturing. Participants will have the opportunity to perform implant surgery, restorationof the same, apart from the above, reading and understanding CBCT, intra oral digital scanner.
 

First Module: (A)Didactic and Table Clinic

DAY ONE:

MORNING SESSION:

1. INTRODUCTION TO DENTAL IMPLANTS
RATIONALE OF DENTAL IMPLANTS

Tea Break:

IMPLANT DESIGN AND BIO MATERIALS
ANATOMY OF THE MANDIBLE AND MAXILLAE

AFTERNOON:

UNDERSTANDING BONE PHYSIOLOGY
DIAGNOSIS CLINICAL AND RADIOGRAPHIC
TREATMENT PLANNING

Day Two:

MORNING SESSION

MEDICAL CONTRAINDICATIONS

ASPESIS

SURGICAL PROTOCOL

AFTERNOON

CBCT- INTERACTIVE DISCUSSION

FIRST COMPANY -TABLE DEMONSTRATION ON MODELS

DAY Three:

MORNING SESSION:

SUTURING TECHNIQUES
UNDERSTANDING WOUND HEALING
ANTERIOR ESTHETICS
IMMEDIATE IMPLANT PLACEMENT

AFTERNOON:

SECOND COMPANY- TABLE DEMONSTRATION ON MODELS
THIRD COMPANY- TABLE DEMONSTRATION ON MODELS
INTERACTIVE SESSIONS CASE DISCUSSIONS

First Module (B) Surgical Phase:

During the First Module or Before the end of the First Module (Didactic and Table Clinic), the participants are requested to get their cases approved, and for which they should come along with the medical records, Models, CBCT, wherever applicable, OPG & IOPA, and discuss the case with the Faculty, and get them approved, which would benefit all the participants.
An appropriate date could be finalized and the surgical procedure could be carried out with each participant assisting one another under the guidance of the Faculty.
This would ensure maximum benefits to the participants.

THREE MONTHS LATER-SECOND MODULE (DIDACTIC)

PLANNING THE RESTORATION
IMPRESSION MAKING (OPEN TRAY AND CLOSED TRAY METHOD)
PRINCIPALS OF PLATFORM SWITCHING
CEMENT V/S SCREW RETAINED RESTORATION
ACCIDENTS AND COMPLICATIONS HOW TO AVOID THEM??
MONITORING AND MAINTENANCE OF IMPLANTS

CASE PRESENTATION BY PARTICIPANTS

PRACTICAL SESSION
EXPOSING THE IMPLANTS
SELECTION AND PLACEMENT OF GINGIVAL FORMER
IMPRESSION MAKING
PLACEMENT OF RESTORATION

Course HIGHLIGHTS:

1. Hands on training.

2. Implant placement under proper guidance.

3. Mentor guided for next couple of implants.

4. Planning and placement of restoration.

5. Understanding and interpreting CBCT

6. International certification from Germany.

7. 32 CDE points.

Course Venue: Marriot courtyard, Andheri east.

Course Schedule: 3rd-5th June 2016.

Course Timings: 8.45 am-6:00 PM

Course Fee:  Rs.65,000/- inclusive of taxes

Includes one Implant & placement on patient, Morning tea, afternoon tea and lunches & Course material.

Description:

-       Class  size is limited to 5 participants

-       Multimedia presentations

-       Clinical discussions

-       Handling of the Equipment

-       Live demonstration on patient

Even though we mimic the western countries in our professional science, one aspect of dentistry which has not caught up with the indian dentists in CONSCIOUS SEDATION. Technically through various terminologies like painless dentistry, sleep dentistry, procedural sedation are utilized to depict various forms of sedation, one aspect of sedation called "NOIS" (i.e) NITROUS OXIDE INHALATION SEDATION has been practised and used by general and speciality dentists to perform minor dental procedures with utmost comfort for the patient.

The unique team was formed with the objective of training our fellow colleague in the filed of "NOIS".

We intend to conduct a two day workshop on the basics and clinical details of practising "NOIS" independently at "INDIAN DENTAL SEDATION ACADEMY".

The Training program will be the one of its kind in india to provide the dentists the utmost experience in the field of "NOIS". So do enroll yourself at the earliest and experience it.

Course Overview

Day 1

• Introduction to conscious sedation
• Myths and Facts about NIOS
• The machine and its safety features
• Patient Selection
• Anaesthetist perspective of NOIS
• Medical Emergencies & its management
• Emergency Resuscitation skills for Dental Healthcare
• Professionals (TACT Academy)

Day 2

• How to operate NOIS
• NOIS and its clinical application
• Documentations about NIOS
• Legal aspects of conscious sedation
• Tricks & Trade of NIOS
• Behind the Scene
• Live case Demonstrations
• Personal Interaction

Note: For pedodontist and post graduates in pedodontics

• Practical Behaviour Assessment of Child
• Pediatric treatment planning protocol on sedation
• Videos and cases discussions on pediatric cases under NIOS.
• Intravenous sedation-assisted dentistry treatment planning and protocols discussion with the Anaesthetist.

brief

A brief outline on Undergraduate Endodontics

1. Patient selection
2. Diagnosis
3. Treatment planning
4. Instruments & Materials
5. Canal anatomy

Clinical Lectures with Tips & Tricks

6. Patient prep
7. Access opening & Working Length using Xrays & Apex locators
8. Biomechanical prep, Intracanal Irrigation & Dressings
9. Management of Hot tooth/ Weeping canal
10. Obturation
11. Core-buildup materials and methods
12. Post & Core

Bonus

13. Endodontic Practice management

Note

• Lectures will be supported by demonstrations / videos  
• Attendees will be provided with patients on the last day to practice
• and learn better.
• Lectures are focussed towards clinical material, so that you can start
• using the right techniques from Day 1.
• Those who registered in advance before december 31, patients will
• be provided by academy.
• You can also bring your own patients.
• Course materials for the 5 patients will be given by the academy.
• 5 Patients can be done even after the course also (on sundays). 

Course Details:

Smile Designing

• Veneer
• Tooth preparation for different types of Veneer
• Composite veneers
  • Porcelain laminate veneer
  • Gingival retraction Techniques
  • Elastomeric Impression making
  • Shade selection
  • Temporization
  • Luting of Veneers

COMPOSITE RESIN RESTORATION:

• Diastema Management
• Management of Peg lateral
• Bleaching
  • In-office bleaching
  • Night guard bleaching
  • Internal / Walking Bleach
    • Open sandwichMaterial revision
    • Layering technique, Ramped / staged curing, LED vs QTH
    • Bi-layered restoration,
• Closed sandwich
• Class I,II,III,IV,V
  • Trouble shooting
  • Post-op sensitivity
  • Marginal leakage
  • Discolouration
  • De-bonding
• Matrices
  • Sectional Matrix Systems and other newer Matrix Systems
  • Wedges and Wedging Techniques
• Manipulation and Handling of Dental Materials

Smile Designing

• Veneer
• Tooth preparation for different types of Veneer
• Composite veneers
• Porcelain laminate veneer
• Gingival retraction Techniques
• Elastomeric Impression making
• Shade selection
• Temporization
• Luting of Veneers
• Diastema Management
• Management of Peg lateral
• Bleaching

• In-office bleaching
• Night guard bleaching
• Internal / Walking Bleach

                 COMPOSITE RESIN RESTORATION

• Material revision
• Layering technique, Ramped / staged curing, LED vs QTH
• Bi-layered restoration,

• Open sandwich
• Closed sandwich
• Class I,II,III,IV,V

• Trouble shooting
• Post-op sensitivity
• Marginal leakage
• Discolouration
• De-bonding

• Matrices
• Sectional Matrix Systems and other newer Matrix Systems
• Wedges and Wedging Techniques
• Manipulation and Handling of Dental Materials

MODULE 1 :

Management of pocket (Curettage, Root planing)

MODULE 2 :

Gingivectomy and Gingivoplasty

MODULE 3 :

Crown lengthening with bone reduction

MODULE 4 :

Gingival Depigmentation and Frenectomy

Course Days Schedule: Alternate Mondays.

Course Timimg: 12:30 PM to 4:30 PM

Learnings:

1. Introduction:

1. Case Selection
2. Aetiology, Incidence & Clinical Presentation
3. Demonstration & Usage of Armamentarium
4. Anaesthesia & Anxiety Control
5. Indications
6. Radiographic Interpretation
7. Pharmacology
8. Indications & Contraindications
9. Management Of Complications
10. Atraumatic Extraction Techniques
11. Post Operative Management
12. Atraumatic extraction techniques.
13. The elevator-only extraction technique

2. Implants and Patients:

1. Phases of comprehensive treatment plan with dental implants
2. Therapeutical actions that belong to each phase. 
3. Surgical anatomy and local anatomical factors in relation to implant procedures.
4. Main contraindications and risks factors
5. Identifying patients’ expectations
6. Important factors for reaching patient satisfaction with implant treatment.

3. Placing Dental Implants:

1. Implant Placement 
2. Guided Tissue Regeneration (GTR)
   • Principles
   • Favourable and unfavourable sites
   • Clinical techniques
   • Devices for GTR
3. Autogenous Bone Graft
   • Differences of graftless placement and bone augmentation procedures.
   • Basic techniques of autogenous bone grafting
4. Implants in Posterior Maxilla 
5. Transalveolar Sinus Elevation
6. Lateral Window Augmentation
7. Surgery Closure
   • Physical characteristics of the needle (diameter, material, curvature)
   • Types of Sutures and
   • Suturing techniques in periodontal and implant surgery.
8. Post Surgical Healing
   • Relate to patients’ post-surgical healing experience
   • Efficient communication with patients

4. Restoring Implants:

1. Restorative Pathways
   • Different pathways in restoring implants
   • Principles of restorative-based treatment planning
   • Main components and design features of implant restorations
   • Main type of abutments 
2. Screw Retained or Cemented Reconstructions
3. Implant Level or Abutment Level Restoration
4. Restoring Edentulous Patients with Implant Supported Fixed Prostheses 
5. Implant Supported Mandibular Overdenture 
6. Impression Techniques
7. Immediate Loading
8. Implant Supported Provisional Restorations 
9. Cementation Techniques

5. Living with Dental Implants and the Future:

1. Post Surgery Maintenance
2. Digital Technology & Implant Dentistry
3. Radiography for Implant Maintenance

Highlights:

1. Hong Kong University Certification
2. 1-1 Mentorship
3. 2 Day Workshop 
4. Focus on High Quality
5. Thorough theory
6. Live Demonstrations
7. Comprehensive Hands-on
8. Through Clinical Exposure

with lectures, demonstrations and hands on workshop

Duration : 3 Days | Faculty : Dr. B. Mohan

THE PROGRAM AN OVERVIEW:

The increasing demands for high quality cosmetic dentistry makes it essential for the practitioners to update themselves on the material science and the practical techniques to meet the patient needs. Mastering Composite resin is the first step towards this goal. This program on Composites has been carefully crafted for the practitioners to handle this material with ease and give the patients an everlasting smile. This clinically oriented curriculum is presented in an best possible educational environment, which makes learning exciting and effective. The academy is equipped with all latest equipments and materials of International Standards.

Lectures, demonstrations and hands on workshop are planned in such a way that the participants will be able to effectively incorporate the learnt techniques in their day to day practice. The program will also include u2013 discussions and evaluations which will enhance the most effective interchange of knowledge.

LEARNING OBJECTIVES :

• Quick review of basic sciences essential for understanding adhesive dentistry and composites
• To master the art of selecting the right materials and techniques
• Effective shade matching
• Essentials of photography
• Mastering essential clinical procedures with hands on for direct restorations

PROGRAM HIGHLIGHTS :

• The program is designed for a maximum of 10 participants only to enable personalize interaction and attention.
• The program will consist of lectures, demonstrations, hands on workshops with interactive evaluation.
• The program is structured in a logical sequence to master the art and science of composite placement
• Lectures will be closely paired with hands on sessions required for different clinical scenario’s.

BRIEF GLANCE OF THE MODULES

• The most common procedure done on day to day practice but many things are yet to be mastered in this material. The clinical secrets of successful composite placement and finishing and polishing will be dealt.
• Introduction to the field of cosmetic dentistry
• Adhesive dentistry
• Material advancements and instrumentation
• Shade Matching and shade mapping for composites
• Clinical techniques on Diastema Closure, class III and masking of stains with hands on
• Tips for successful Class II restorations with hands on
• Detailed training on Class IV restoration with finishing and polishing secrets – hands on
• At the end of the program participants will be able to do restorations that blend perfectly with the existing dentition, the first step in cosmetic dentistry.